Although cross-stitch means a kind of linen as a word, it is defined as an embroidery technique among the people. Cross stitch is also said to have a more elegant appearance compared to other embroidery techniques. Cross-stitch, which is also called cross-processing, can be applied as etamine on normal fabrics, although it can be applied on plain and square patterned fabrics. Moreover, you can use cross-stitch in many places.

These include pillows, bed covers, coffee table tops, seat cushions, frames and many more floors where you can use your imagination. If you want to try this technique, you can check out our special cross-stitch guide for beginners.

Tips for Making Cross Stitch

Necessary Materials for Cross Stitch
The embroidery technique called Cross Stitch requires few materials like many other embroidery techniques. These can be listed as needles, fabric, colored threads and an example of the pattern you want to apply.

In addition to these, if you are going to be finished in cross-stitch, you should use etamine fabric, and if you are going to do cross-stitch, use pulley and plain fabric. On the other hand, the yarns used for cross stitch are different from the yarn types used in other embroidery and have a certain fineness. For this reason, when making cross stitch, make sure you have the right threads.

Find Center First

It is very important that you observe the model well while making cross stitch. First, fold the model in four to mark the most apparent square. Then do the same for the fabric. However, this time, instead of marking with a pencil, you can make the center of the fabric firmly by hand tightening.

Prepare the Thread for Processing

Determine whether you want to use threads suitable for cross stitch. Yarns mostly consist of 6 wires. Then separate all the strands and how many wires you need to use in processing, this number is usually 2 or 3, combine that many wires together.

Then put your thread on your needle and leave a small share. Do not tie a knot after spinning your yarn and leave a few centimeters of space behind after doing your first cross. The important thing to note here is that the cross operations you make do not compress this piece of thread. While ending your process, also pass the tip through the bottom of the crosses.

Makin the Cross

If you are doing cross-stitch for the first time, do not expect to be successful immediately. For this, it will be more useful to make your first try on a blank fabric. First, insert the needle from the back of the fabric you are using and pass it over the other surface to make part of the cross. If you want to continue according to your model, continue half-by-half until the end of the row and then turn to complete the crosses in the same way. What you should pay attention to here is that the thread tension must be the same throughout the processing.

French Knot

While cross-stitching, sometimes French knot, in other words, seed processing technique is also used. To do this, first thing you need to do is wrap the thread on the needle twice counterclockwise. Then push the wrapped threads to accumulate at the end of the needle and insert the needle into the other side of the fabric from where it comes to the surface. In this way, the rope will become a knot on the fabric.